Milled Carbon Fiber for PLA 3D Printing Material

Product Description

Milled Carbon Fiber for PLA 3D Printing Material

300 mesh carbon fiber powder was made from high modulus high strength carbon fiber chopped  strands,after grinding, microscopic separating, screening,high temperature drying.It retains many of the excellent performance of carbon fiber,small particle size,clean surface,large surface area,dispersed uniformly with resin,is excellent reinforcing filler of composite products.It can be compound with resin,plastic,rubber and other materials to increase its strength and wear resistance.Widely used in many fields,such as conductive plastic,conductive plate,conductive flooring,anti-static product,building insulation,friction materials and chemical filler.

SPECIFICATIONS:

Model:	XGCP-300
Density:	1.76g/cm3
Carbon content:	>99%
Diameter (μm):	7.0
Mesh:	300
Aspect ratio:	7.14:1
Average Fiber length(μm):	50
Tensile strength(MPa):	200-1500
Young's modulus(GPa):	55-150
Resistivity micron ohm meter:	14

APPLICATION FIELDS:

1.Reinforced rubber,modified plastics and resin: Polypropylene (PP),nylon (PA),polycarbonate resin (PC),phenolic resin (PF),polytetrafluoroethylene resin (PTFE),polyimide resins (PI ),epoxy resin, silicone rubber, polyvinyl alcohol, unsaturated polyester resin;
2.Construction industry: carbon fiber reinforced cement, conductive coatings, anti-static floors;
3.Insulation materials: carbon fiber reinforced preform and refractory bricks, carbon-fiber reinforced ceramic, etc;
4.Anti-static industry: coating, flooring, paint, ink, anti-static filter,
 

STORAGE:
The carbon fiber powder should be keep dry in their original bags and stored in a suitable place,preferably at room temperature with 35-65% relative humidity.Avoid the sun, rain and fire.

PACKAGING:


PRODUCT DETAIL IMAGES: