100mesh Carbon Fiber for Conductive Plastic Reinforcement

Product Description

100mesh Carbon Fiber for Conductive Platic Reinforcement

100 mesh milled carbon fiber powder was made from carbon fiber chopped  strands,after grinding,microscopic separating,screening,high temperature drying.It retains many of the excellent performance of carbon fiber,small particle size,clean surface,large surface area,dispersed uniformly with resin,is excellent reinforcing filler of composite products.It can be compound with resin,plastic,rubber and other materials to increase its strength and wear resistance.Widely used in many fields,shuch as conductive plate,conductive flooring,electrical machinery,anti-static industry,defense industry,building insulation,friction materials and chemical.

SPECIFICATIONS:

Model:	XGCP-100
Density:	1.76g/cm3
Carbon content:	>99%
Diameter (μm):	7.0
Mesh:	100
Aspect ratio:	21.4:1
Average Fiber length(μm):	150
Tensile strength(MPa):	200-1500
Young's modulus(GPa):	55-150
Resistivity micron ohm meter:	14

APPLICATION FIELDS:

1.Reinforced rubber,modified plastics and resin: Polypropylene (PP),nylon (PA),polycarbonate resin (PC),phenolic resin (PF),polytetrafluoroethylene resin (PTFE),polyimide resins (PI ),epoxy resin, silicone rubber, polyvinyl alcohol, unsaturated polyester resin;
2.Construction industry: carbon fiber reinforced cement, conductive coatings, anti-static floors;
3.Insulation materials: carbon fiber reinforced preform and refractory bricks, carbon-fiber reinforced ceramic, etc;
4.Anti-static industry: coating, flooring, paint, ink, anti-static filter,
 

STORAGE:

The milled carbon fiber should be keep dry in their original bags and stored in a suitable place,preferably at room temperature with 35-65% relative humidity.Avoid the sun, rain and fire.

PACKAGING:

PRODUCT DETAIL IMAGES:




SGS TEST REPORT:



CERTIFICATE ORIGIN: