Ceramic fiber villus for brake pads was made of high-quality bauxite,under high temperature melting by molybdenum wire furnace, through techniques like spinning blowing legislation, winnowing Cleaner, organic coupling, high-speed cutting.The fiber has properties like good toughness, thermal stability, chemical stability, low thermal conductivity, high temperature resistance, high strength, uniform dispersion and low shot content.It is suitable for a variety of high-temperature environment for high-performance brake and can meet strict specifications and parameters of sealing materials.Generally used as alternative of asbestos to produce brake pads,brake pads lining,brake shoes, clutch facings, friction strips, friction belts.etc.Adhesive generally is phenolic resin,epoxy resin,unsaturated polyester resin,etc.
SPECIFICATIONS:
| MODEL: |
XGCF001 |
| COLOR: |
Gray white |
| FIBER LENGTH(mm): |
0.3-0.5 |
| FIBER DIAMETER(um): |
4-10 |
| SHOT CONTENT: |
<5% |
| WORKING TEMPERATURE: |
>1100ºC |
| TENSILE STRENGTH: |
1400-1600MPa |
| MOHS HARDNESS: |
4~5.5 |
| DENGSITY(g/cm3): |
1.95 |
| SiO2+Al2O3: |
≥96% |
| Al2O3: |
46% |
| Fe2O3: |
≤1.0% |
STORAGE:
The ceramic fiber should be keep dry in their original bags and stored in a suitable place,preferably at room temperature with 35-65% relative humidity.Avoid the sun, rain and fire.
Audited Supplier 
){kind=link}